A modern evolution of a classic brake, the new Hope V6 Mono Ti is their biggest and most potent brake system ever. A massive single piece 6 piston caliper gives a huge stiffness to weight ratio and maximises surface area for the fastest cooling possible. Inside the caliper sit 6 Titanium pistons, Nitride coated for reduced friction and cross drilled to help even further with heat management. At the lever end, the now well established EVO lever gives both reach and bite point adjustment and can be used with either the stock 'standard' or option and longer 'power' lever blades.
Due to the size of the caliper, the V6 mounts by some new radial mounts to ensure there are no clearance issues. As a result, this means the minimum rotor size that can be used is +20mm larger than the native mount the brake is being attached to.
Alongside the new brake, there is also a new high performance floating and vented rotor in the 3.3mm wide T-Slot rotor. A three part steel outer uses cooling fins to help dissipate heat and is mounted onto a rigid aluminium carrier. As an extra practical touch, the outer rotor is replaceable when worn, saving both cost and wastage down the line. In dyno tests, the new rotor is a full 15% cooler than Hope's already impressive Universal Floating Discs. The rotor is also compatible with most E-Bikes, allowing direct mounting of speed sensor magnets.
The Mono Edition set here is part of a limited run of 1000 brake sets worldwide and includes two brakes in Black and Gold with braided hoses, two T-Slot rotors, mounts and pads.